Filter
Top Products
Continued on the following page >>
3.QA Mode Settings
– 17 –
3.2 Changing DWT ENHANCE. Tab
1
Set the DWT Edge Enhancement effective
Touch [DWT EDGE ENHANCE.] to display the parameters. The appearance of the but-
ton switches over between the highlight (in white outline characters against a colored
background) and normal display each time you touch the button. The parameters are
available when the button is displayed in highlight.
DWT ENHANCE. Screen with Parameters
2
Set the EFFECT parameter
Touch the or button, and set the value within the range between 1 to 20.
The value on the left is the setting saved previously, and the value on the right is the cur-
rent setting.
For details of the EFFECT parameter, refer to the step 2 in 2.2 Setting DWT
ENHANCE. Tab (→ P.7).
NOTE: If the EFFECT parameter is set to an excessive value, artifacts may occur in
the image, or the effective data of the exposure image may be damaged.
Check the output of exposure image, and if the results of enhancement
appear to be too strong, either set the parameter to a smaller value, or set the
DWT Edge Enhancement not effective.