Filter
Top Products
112
List of Messages
The following table explains each of the messages that may appear on the LCD monitor.
z For messages which may appear when a printer is connected, refer to the Direct Print User
Guide.
Busy...
The camera is recording image data to the SD card.
The playback mode is running.
No memory card You attempted to shoot or play back with no SD card installed.
Card locked! The SD card is write-protected.
Cannot record! You attempted to shoot with no SD card installed.
Memory card error! There is something wrong with the SD card.
Memory card full SD card is too full to accommodate more images or print settings.
Naming error!
The file could not be created because there is a file with the same name as
the directory that the camera is attempting to create, or the highest possible
file number has already been reached. In the Set up Menu, set the File Reset
option to [On]. Save all the images you wish to retain onto a computer, then
reformat the SD card. Please note that formatting will erase all the existing
images and other data.
Change the batteries
Battery charge is insufficient to operate the camera. Replace both batteries at the
same time with new AA-size alkaline batteries (p. 17) or fully recharged Canon
NiMH batteries.
No image No images recorded on SD card.
Image too large
You attempted to play back an image larger than 4064×3048 pixels or with a
large file size.
Incompatible JPEG
format
You attempted to play back an incompatible JPEG file.