Filter
Top Products
47
Shooting – The Basics
z Make the brightness in each image
consistent. The final image will appear
unnatural if the difference in brightness
is too great.
z Pan (swivel) the camera to take
successive shots.
z To shoot close-ups, slide the camera
over the subject, keeping it parallel to
the subject as you move.
Shooting
1 Set the mode switch to .
2 Select or from the
menu.
z See
Selecting a Shooting Mode (p. 35
).
3 Shoot the first image.
z The exposure and white balance settings are
set and locked with the first image.
4 Compose and
shoot the second
image so that it
overlaps the first.
z Minor discrepancies in
the overlap can be
corrected with the
software.
z An image can be retaken. Press or to
return to that frame.
5 Use the same procedures to
shoot the remaining frames.
z A maximum of 26 images can be recorded
either horizontally or vertically.
6 Press the SET button after the
last shot.
Sequence