Filter
Top Products
27
Basic Functions
Shooting Mode
Exposure Compensation
White Balance
Drive Mode
ISO Speed
Photo Effect
Light Metering Mode
Compression
Resolution
Postcard Print
Flash
Red-eye Reduction
Macro/Infinity Mode
Quick Shots
Auto Rotate Function
Movie Recording Mode
Digital Zoom Setting*
1
Camera Shake Warning
Low Battery
(Red)
2.8x 3.5x 4.4x 5.4x 7.0x
p. 35, 48
p. 76
p. 77
p. 43, 45
p. 79
p. 80
p. 75
p. 37
p. 37
p. 51
p. 39
p. 39, 41
p. 42
p. 38
p. 83
p. 53
p. 44
p. 27
p. 18
z
When a Shooting mode setting is changed, the
settings appear on the LCD monitor for about 6
seconds even if the LCD monitor is set to No
information or off. (The Shooting mode settings
may not appear depending on the camera setting.)
You can set the flash, red-eye reduction, macro/
infinity mode, self-timer, continuos shooting, and
the light metering mode settings while this
information appears on the LCD monitor
.
z and the icons in (the shaded area of
the chart) appear even when the information view
is turned off.
z
In addition to the above, the AF frame, spot metering
frame, recordable images or recordable movie time
are displayed as in the example to the left
.
z
Setting to the , or modes turns the LCD
monitor on regardless of whether it is set to on or off
.
zA slow shutter speed has likely been selected
because of insufficient lighting if the upper
indicator beside the viewfinder blinks orange after
the metering preparations are complete and the
camera shake icon ( ) displays in the LCD
monitor. Set the flash to or , or affix the
camera to a tripod to shoot.
zAfter you take a photo by fully pressing the
shutter button, the image displays on the LCD
monitor for approximately three seconds (or the
review duration you set from 3 to 10 seconds). If
you press the button while the image is
displayed, it will continue to display (p. 34).
*1: Zoom powers reflect the combined optical and digital zoom
effects. These figures appear when the digital zoom is activated.