Filter
Top Products
32
Using the LCD Monitor
The LCD monitor can be used to compose images while
shooting, adjust settings menus and replay images.
¡The image in the LCD monitor may darken when the
monitor is used under sunlight or other strong lighting.
This is not a defect.
, and Modes
¡Pressing the DISPLAY button cycles the LCD monitor to the
next mode each time the button is pressed.
Standard
(No Information)
Detailed
(Information View)
Off
¡The on/off setting of the LCD monitor display mode is
memorized when the camera is turned off. When the
camera is turned on again it assumes the last mode.
However, when the LCD monitor is turned on and the
“Change the Battery Pack” message appears, the LCD
monitor may not automatically turn on the next time the
camera is started.
¡When the LCD monitor is set to Standard or Off,
shooting information appears for approximately 6
seconds when you take any of the following actions.
- The power is turned on.
- The , / , or / / button is pressed.
- The camera settings are changed.
- The Setup menu is closed.
¡Setting the mode dial to or modes turns the LCD
monitor on regardless of whether it is set to on or off.