Filter
Top Products
185
The Camcorder's Wi-Fi Functions
5 To change the port number to be used, touch [80].
Enter a different port number and touch [OK].
• By default, the port number is set to 80 but you can
change it if necessary.
6 If necessary, set up a connection to an access point.
• If you have previously configured and saved a connection
to an access point, the camcorder will connect automati-
cally to the last access point used. Continue to step 7.
• If no connections to access points have been saved in the
camcorder, the message [Save the access point] will
appear on the screen. Touch [OK] to configure and save a
new access point connection (step 2 in Wi-Fi Connection
Using an Access Point (A 208)) before continuing with
this procedure.
7 When the wireless connection is successfully estab-
lished, the camcorder’s ID will be displayed on the
screen.
• The camcorder will be ready to connect with the iOS/
Android device.
COPY