Filter
Top Products
186
The Camcorder's Wi-Fi Functions
Connecting the iOS/Android Device
If the iOS/Android device is connected to the same Wi-Fi net-
work as the camcorder, CameraAccess plus will recognize the
camcorder's ID and register it automatically. Otherwise, you can
enter the camcorder's ID manually.
As long as you do not reset the camcorder's settings, you only
need to register the camcorder's ID the first time you connect
the device. Later on, you only need to enter the Monitor while
Out password (start this procedure from step 4).
To register the camcorder's ID in the CameraAccess plus
app
1 If the iOS/Android device is near the camcorder, turn
on Wi-Fi and select the same access point as that to
which the camcorder is connected (step 6 in the previ-
ous procedure).
2 Start the CameraAccess plus app and touch Setting
and then Start.
• If the iOS device is not connected to the same access
point as the camcorder, enter manually the camcorder's
ID that is displayed on the camcorder's screen (step 7 in
the previous procedure).
COPY