Filter
Top Products
Changing Shooting Functions
139
Changing the IS-Mode Settings
● Select [IS Mode], then press the qr buttons to
select an option.
● [Continuous]: The image stabilization is
always on. You can confirm the result directly
on the display, which makes it easier to check
the composition or focus of the subject.
● [Shoot Only]: The image stabilization is only
on in the moment of shooting.
● [Panning]: The image stabilization only works
for the effect of up and down motion. This
option is recommended for shooting objects
moving horizontally.
Registering Functions to the c Button
● Select [Set c button], then press the m
button.
● Press the opqr buttons or turn the  dial
to select the functions to register, then press
the m button.
● Pressing the c button will call up the
registered function.
•
If camera shake is too strong, fix the camera to a tripod. However, it is
recommended to set IS Mode to [Off] when the camera is fixed to a tripod.
• When using [Panning], hold the camera horizontally. Image stabilization
does not work when the camera is held vertically.
• Press if you want to cancel a function.
• When this symbol is shown on the bottom right of an icon, the
function cannot be used in the current shooting mode or function setting.
• In , each press of the c button records white balance data (p. 71),
and the white balance settings also change to .
• In , each time you press the c button, the shutter sound’s clip
(p. 141) in the 5 tab will play. Use this when you want to draw the
attention of the subject before shooting.
COPY