171
EDITING IMAGES
You can use the following procedure to reduce underexposure
only, while maintaining the bright areas of an image.
1. In the PLAY mode, use [W] and [X] to select
the image you want to correct.
2. Press [MENU].
3. On the “PLAY” tab, select “Dynamic Range”,
and then press [X].
4. Use [S] and [T] to select the setting you want
and then press [SET].
IMPORTANT!
• Performing Dynamic Range correction on an image causes
the new (corrected) version to be stored as a separate file.
• When you display a corrected image on the camera’s
monitor screen, the date and time indicates when the
image was originally recorded, not when the image was
corrected.
Reducing the Effects of
Underexposure
When you want to do this:
Select this
setting:
Apply Dynamic Range to a greater
extent than “Expand +1”
Expand +2
Reduce underexposure Expand +1