79
SHOOTING A SNAPSHOT
Recording with Normal-speed
Continuous Shutter, High-speed
Continuous Shutter, and Flash
Continuous Shutter
1.
Press the shutter button to shoot.
• With Normal-speed continuous shutter and High-speed
continuous shutter, images continue to be shot as long as
you keep the shutter button depressed. Releasing the
shutter button stops shooting.
• Flash continuous shutter can shoot up to three images.
Shooting stops if you release the shutter button before
three images are recorded.
IMPORTANT!
• The speed of normal speed continuous shutter and high-
speed continuous shutter depend on the type of memory
card being used and the amount free space available in
memory. When shooting to built-in memory, continuous
shutter shooting is relatively slow.
Recording with Zoom Continuous
Shutter
1.
Use [S], [T], [W], and
[X] to move the
selection boundary
around the image of
the subject on the left
side of the monitor
screen until it is
located at the part you want to enlarge, and
then press [SET].
This will enlarge the area within the boundary and display it
in the right side of the monitor screen.
2. Press the shutter button to shoot.
Both the left image and the right image will be recorded.