11
Quick Start Basics
Be sure to attach the lens cap and strap to the camera before using it.
. Attaching the Lens Cap
. Attaching the strap
• Attach either end of the strap to the two strap rings on
the sides of the camera as shown in the illustration.
• After you are finished pull on the strap to test it and to
make sure it does not come loose.
Note that the battery of a newly purchased camera is not charged. Perform the steps
under “To charge the battery” to bring the battery to a full charge.
• Your camera requires a special CASIO rechargeable lithium ion battery (NP-100)
for power. Never try to use any other type of battery.
1. Aligning the positive
+
and negative
-
terminals of the battery with those of the
charger unit, load the battery into the
charger unit.
Attaching the Lens Cap and Strap
First, charge the battery prior to use.
To charge the battery
Lens cap