Casio EX-F1 Digital Camera User Manual


 
153
Appendix
. Power Supply
Use only the special rechargeable lithium ion battery (NP-100) to power this
camera. Use of any other type of battery is not supported.
The camera does not have a separate battery for the clock. The date and time
settings of the camera are cleared about one day after power is cut off from the
battery. If this happens, be sure to reconfigure these settings after power is
restored (page 140).
. Data Error Precautions
Your digital camera is manufactured using precision digital components. Any of the
following creates the risk of corruption of data in camera memory.
Removing the battery or memory card while the camera is performing some
operation
Removing the battery or memory card while the back lamp is flashing green after
turning off the camera
Disconnecting the USB cable while communication is in progress
Using a battery that is low
Other abnormal operations
Any of the above conditions can cause an error message to appear on the monitor
screen (page 174). Perform the action indicated by the message that appears.
. Operating Environment
Operating Temperature: 0 to 40°C (32 to 104°F)
Operating Humidity: 10 to 85% (non condensation)
Do not place the camera in any of the following locations.
In an area exposed to direct sunlight, or large amounts of moisture or dust
Near an air conditioner or in other areas subjected to extreme temperature or
humidity
Inside of a motor vehicle on a hot day, or in an area subjected to strong vibration