Filter
Top Products
53
Snapshot Tutorial
5. Hold down the shutter button to shoot.
Images continue to be shot as long as you keep the shutter button depressed.
Releasing the shutter button stops shooting.
• When “AUTO-N” is selected
as the CS speed, you can
continue recording until the
memory card becomes full.
When any other CS speed
setting is selected, recording
will stop automatically after a
maximum of 60 images are
recorded, even if you keep the shutter button depressed.
• When “CS fps” is selected for “Ring Setup” (page 85), you can use the function
ring to change the CS speed while image recording is in progress.
6. Save the CS images (page 58).
When you half-press the shutter button while Slow Motion View is selected, the
camera will start to pre-record images continually and play them back at slow speed.
Up to two seconds worth of pre-recorded images are in memory at one time, with the
older images deleted automatically as new ones are stored. Fully pressing the shutter
button will save the pre-recorded images. This mode lets you view the pre-recorded
images in slow motion, and perform final recording when the image you want
appears. You can specify one of eight playback speeds for pre-recorded images.
1. In the REC mode, set the mode dial to t (Auto).
2. Set the CS dial to º (Slow Motion View).
3. Use [8] and [2] to select the second control panel option from the
bottom (Slow Motion View Speed).
Shooting with Slow Motion View
Function ring
Faster (clockwise)
Slower (counterclockwise)
*
*