Cisco Systems 4300E Security Camera User Manual


 
3-21
Cisco Video Surveillance 4300E and 4500E High-Definition IP Camera User Guide
OL-25230-02
Chapter 3 Configuring and Managing the IP Camera
Network Setup Windows
Table 3-11 describes the options in the Time Settings window.
Ta b l e 3-11 Time Settings Window Options
Option Description
Set Time Mode Area
Manually Configure
Time
Choose this option if you want to set the time for the IP camera manually.
Use NTP Server to
Update Time
Choose this option if you want the IP camera to obtain its time from a
network time protocol (NTP) server.
If you check this check box, the camera contacts the designated NTP server
every 64 seconds and synchronizes its internal clock with the time of that
server.
Local Time Area
Note These options do not apply if you choose the Use NTP Server to Update Time option.
Set Local Date Enter a date for the IP camera. The camera is updated with this date when
you click Save Settings.
Set Local Time Enter a time for the IP camera. The camera is updated with this time when
you click Save Settings.
Clone PC Time button Click this button to update the IP camera date and time with the date and time
of the PC that you are using.
Time Zone and Daylight Saving Area
Time Zone Choose the time zone in which the IP camera is located.
The time that appears when you view video from this IP camera reflects this
time zone.
Adjust for Daylight
Saving Time
Check this check box if you want the time of the IP camera to adjust
automatically for daylight saving time.
Edit Default Daylight
Saving Configuration
for Time Zone
Check this check box if you want the daylight saving time adjustment of the
IP camera to be different than the default adjustment for the selected time
zone.
Time Offset If you choose to overwrite the default time zone configuration, enter the
number of minutes that the time of the camera adjusts when daylight saving
time starts.
The camera automatically adjusts its time back by this number of minutes
when daylight saving time ends.
Start Date
Start Time
If you choose to overwrite the default time zone configuration, enter the day
and time (in 24 hour format) that daylight saving time begins. At this day and
time, the time of the IP camera adjusts by the value in the Time Offset field.
End Date
End Time
If you choose to overwrite the default time zone configuration, enter the day
and time (in 24 hour format) that daylight saving time ends. At this day and
time, the time of the IP camera adjusts to the non-daylight saving time.