Cisco Systems 4500E Security Camera User Manual


 
1-4
Cisco Video Surveillance 4300E and 4500E High-Definition IP Camera User Guide
OL-25230-02
Chapter 1 Overview
IP Camera Physical Details
Figure 1-2 and the table that follows describe the items on the rear of the IP camera.
Figure 1-2 Rear of IP Camera
1 Power LED Lights bright when the IP camera is powering up. Lights dim when
the camera is IP operating
2 Analog Audio/Video Port Allows the connection of an optional Y cable or mini cable with
BNC connector. You can connect an optional external speaker or
microphone to the Y cable, or an optional video monitor to the mini
cable with BNC connector. Both cables are included in the optional
audio/video cables accessory kit can be purchased from Cisco
(Cisco part number CIVS-IPCA-1021=).
3 PoE LED Indicates information about PoE as follows:
Lit green—PoE connection is detected
Off—PoE connection is not detected
4 LAN port Accepts a standard LAN cable to connect the IP camera to a
10/100BaseT router or switch.
5 Network Activity LED Indicates information about the network connections as follows:
Lit amber—LAN connection is detected
Off—LAN connection is not detected
Blinking—Data is being transmitted or received via the LAN
connection