Cisco Systems 4500E Security Camera User Manual


 
1-5
Cisco Video Surveillance 4300E and 4500E High-Definition IP Camera User Guide
OL-25230-02
Chapter 1 Overview
IP Camera Physical Details
Figure 1-3 and the table that follows describe the item on the side of the IP camera.
Figure 1-3 Side of IP Camera
6 Power input Provides for the connection of an optional 12 V, 1 amp DC power
adapter or 24 VAC power adapter.
Caution Use only the Cisco specified power supply adapter.
7 Reset button Recessed button that reboots the IP camera or resets it to a default
state. You can use a pin or paper clip to depress it. It can be used
any time that the IP camera is on and can have various effects, as
described in the
“Resetting the IP Camera” section on page 2-11.
8 GPIO ports General purpose input/output (GPIO) terminal block that includes
2 input ports (labeled DI1, DI2), 2 output ports (labeled DO1,
DO2), a grounding port (labeled GND), and a 5-pin RS-232 port.
9 USB port Supports up to 8 GB of USB flash storage of video data when the
camera loses network connectivity.
1 DC auto iris lens connector Connection for cable from DC auto iris lens