Cisco Systems 4500E Security Camera User Manual


 
2-9
Cisco Video Surveillance 4300E and 4500E High-Definition IP Camera User Guide
OL-25230-02
Chapter 2 Getting Started
Understanding the IP Camera User Interface
IP Camera Windows
The IP camera user interface includes these main windows:
Home window—Displays the information that is described in Table 2-3.
Setup window—Provides access to the IP camera configuration windows. For detailed information,
see
Chapter 3, “Configuring and Managing the IP Camera.”
Camera Video/Control window—Displays live video from the camera and lets you control a variety
of camera and display functions. For detailed information, see
Chapter 4, “Viewing Live Video.”
Ta b l e 2-3 Home Window Information
Field Description
General Information
ID Identifier of the IP camera. To configure the ID, see the “Basic Settings
Window” section on page 3-18.
Name Name of the IP camera. To configure the name, see the “Basic Settings
Window” section on page 3-18.
Current Time Current date and time of the IP camera. To set the date and time, see the
“Time Settings Window” section on page 3-20
S/N Serial number of the IP camera.
Firmware Version of the firmware that is installed on the IP camera.
Codec Version of the codec that is running on the IP camera.
Part Number Cisco manufacturing part number of the IP camera.
Top Assembly Revision Cisco assembly revision number.
Network Status
MAC Address MAC address of the IP camera.
Configuration Type Method by which the IP camera obtains its IP address. To configure this
method, see the
“IP Addressing Window” section on page 3-19.
LAN IP IP address of the LAN to which the IP camera is connected. To configure this
IP address, see the
“IP Addressing Window” section on page 3-19.
Subnet Mask Subnet mask of the LAN to which the IP camera is connected. To configure
the subnet mask, see the
“IP Addressing Window” section on page 3-19.
Gateway Address IP address of the gateway through which the IP camera is connected. To
configure this IP address, see the
“IP Addressing Window” section on
page 3-19.
Primary DNS IP address of the primary DNS server, if configured for the IP camera. To
configure a primary DNS server, see the
“IP Addressing Window” section on
page 3-19.
Secondary DNS IP address of the secondary DNS server, if configured for the IP camera. To
configure a secondary DNS server, see the
“IP Addressing Window” section
on page 3-19.
IO Port Status
Input Port 1 Current state of input port 1 on the IP camera.
Input Port 2 Current state of input port 2 on the IP camera.