Filter
Top Products
17
Web Configuration
After completing the Setup Wizard, you are ready to use your camera. The Web
configuration utility is designed to easily access and configure your DCS-900W.
If you would like to open the configuration page from a Web Browser, enter the IP
address that you assigned to your DCS-900W.
Note:
The PC’s IP address must correspond with the DCS-900W’s IP address in the same
segment (i.e. PC=192.168.0.5, Camera=192.168.0.20) for the two devices to
communicate. For instructions on how to do this, please access instructions for
installing any of the D-Link Broadband Gateway products from support.dlink.com/
products.
Home Screen
After the camera’s IP address is entered in the Browser, the DCS-900W Home screen
will appear with a still image from your camera. There will be three options to choose
from to set up and view your Internet Camera:
! ActiveX
! Java
! Setup
DCS-900W Configuration