Filter
Top Products
56
Once you have completed the initial configuration of the DCS-900W using the Web-
based interface, you can review or change your configuration using either the Web-
based configuration utility or the Property Settings in the DCS-900W IPView Lite.
To access the Property Settings menu, select Camera > Property from the main menu.
A dialog box will appear which allows for Web Configuration settings and upgrading
firmware. The Camera Property dialog box will appear. Select the desired options from
the tab selections to configure the camera.
General
Allows settings for the camera name, location and administrator information such as
administrator ID and password. Please refer to the DCS-900W Configuration section
under Advanced – System on P.19 for further details.
Camera Property Settings > General
IPView Lite (continued)