Filter
Top Products
37
Protocol:
Two options are available for linking with the Time Server. The default setting is NTP.
Select the time for the Linux time server.
TimeZone:
The System administrator must select the time zone for the region. Please refer to the
Appendix for the time zone selection table.
To set the Time manually select Set Manually. The system administrator must then
enter the Date and Time in the respective field manually. When Set Manually is selected,
each time the DCS-900W is powered off, the time must be reset manually at reboot.
Apply/Cancel:
After making sure all settings are correct, click on the Apply icon to store the settings
in the DCS-900W. You can alternatively click on the Cancel icon if you do not wish to
make changes to the DCS-900W.
Tools > Time
DCS-900W Configuration (continued)