Filter
Top Products
25
2.10 Connecting to a computer
Read this section carefully to learn how to transfer files to a PC. Use the supplied USB cable to
connect the digital camera to the computer.
2.10.1 Mass Storage
The digital camera can provide the function of mass storage which is the same as card reader.
1. Use the USB cable to connect the digital camera to computer as the picture shown above.
2. When the digital camera is connected to the PC by USB cable, the digital camera will
automatically pop up two function modes Mass Storage and Video Camera for the choosing
to connect the computer by USB.
3. Use the joystick (Up/Down button
) to select the Mass Storage item, and press the OK
to confirm the selection. The screen turns off.
4. When finishing installing the system, the Mass Storage item will be added to My Computer
of the system.
5. You can start using the added mass storage which is the SD card reader provided by the
camera. There are five folders in the mass storage: DCIM/ 100FSCAM, MOVIE, MUSIC,
PHOTO and DEMO.DCIM/ 100FSCAM is used to save the files generated by capturing,
shooting the video and sound recording. MOVIE is used to save the AVI, ASF and MOV
movie files stored externally. MUSIC is used to save the MP3 and WAV music files stored