Filter
Top Products
35
3.4.7 TV Standard
Use the TV option to set up the applicable local TV system.
1. Turn the camera on, and use joystick (Left/Right button
) to System icon, and then press
OK
to enter Setup mode.
2. Use joystick (Up/Down button
) to select the TV Standard option. The screen appears as
below.
3. Use the joystick (Left/Right button ) to select NTSC/PAL, and press the OK to
confirm.
4. Press the joystick (ENTER button
) or Mode button to leave the menu.
3.4.8 Default
Use this option to reset all settings to the factory default.
1. Turn the camera on, and use joystick (Left/Right button
) to System icon, and then press
OK
to enter Setup mode.
2. Use the joystick (Up/Down button
) to select the Default 選option, and the screen
appears as below. Press the OK
to use the joystick (Left/Right button ) to select
or .
3. Press the OK to confirm.
4. Press the joystick (ENTER button
) or mode button to leave the menu.
3.4.9 Memory Status
1. Turn the camera on, and use joystick (Left/Right button ) to System icon, and then press
OK
to enter Setup mode.
2. Use joystick (Up/Down button
) to select the Memory Status option. The screen appears
as follow. Press OK
to enter to display the current storage status.