Filter
Top Products
33
3.4.1 Setting the date and time
Please refer to the section 2.6.1 “Setting the date and time”.
3.4.2 Setting the beep function
1. Turn the camera on, and use joystick (Left/Right button ) to System icon, and then press
OK
to enter Setup mode.
2. Use the joystick (Up/Down button
) to select the Beep option. The screen appears as
below.
3. Use the joystick (Left/Right button ) to select Beep On or Beep Off, and press the OK
to confirm.
4. Press the joystick (ENTER button
) or Mode button to leave the menu.
3.4.3 Setting the language
Please refer to the section 2.6.2 “Setting the language”.
3.4.4 Auto Display Off
Use the auto power off function to set a period of inactivity after which the camera will switch the
LCD screen off.
1. Turn the camera on, and use joystick (Left/Right button
) to System icon, and then press
OK
to enter Setup mode.
2. Use the joystick (Up/Down button
) to select the Auto Display Off option. The screen
appears as below.
3. Use the joystick (Left/Right button ) to select 30s, 60s, DEMO, OFF and press the OK
to confirm. If the option is set to DEMO, the camera will automatically play the movie
and picture files in the DEMO folder repeatedly after 30 seconds. It’s the same as the
screensaver.
4. Press the joystick (ENTER button
) or mode button to exit the menu.