Filter
Top Products
38
2. Long press the joystick (ENTER button ), and the camera will star searching for the
station frequency automatically. Press the OK
to stop receiving the frequency during this
process. When finishing auto search, the camera will save the station automatically. Use the
joystick (Left/Right button
) to select the station searched automatically.
3. Press the joystick (ENTER button ), and press the joystick (Up/Down button ) to
search manually. Press the joystick (Up button
) and the current channel is ＋0.1. Press
the joystick (Down button
) and the current channel is －0.1.
4. Choose the station you want to receive. Press the OK
to start recording, and press the
OK
again to stop recording. To listen to your FM recording, please refer to section 2.9.3
“Playing the audio file”, found on page 23.
5. Use the joystick (Up/Down button
) to increase or decrease the volume. Press the joystick
(Up button
) and the current volume increases. Press the joystick (Down button ) and
the current volume decreases.
6. Press and hole the Browse
to lock all the buttons of the camera. Press and hold the
Browse
again to unlock the buttons.
7. Press the Mode button
, and the camera system will switch to mode selection interface.
Note: Use the earphone as antenna while searching the station.