Filter
Top Products
28
3.1.2 Setting the flash
While in Photo mode, use the joystick (Up/down button ) to highlight the Flash option, and
use the joystick (Left/Right button
) to switch the Flash mode.
See the table below for a description of each button’s function.
Flash is turned off
Auto flash, fires only when needed.
Force flash, the flash is always on.
3.1.3 Setting the size
While in Photo mode, press the joystick (ENTER button ) to enter the Setup menu to adjust the
size of the file.
1. Use the joystick (Up/Down button
) to select the Size option.
2. Use the joystick (Left/Right button
) to select 12M, 5M, 3M, 1.3M or SVGA and press
OK
to confirm.
3. Press the joystick (ENTER button
) again to leave the menu.
3.1.4 Quality
The Quality option lets you setup the quality of the captured picture. The larger size picture
contains more content; therefore it takes more memory space.
1. While in Photo mode, press the joystick (ENTER button
) to enter the Setup menu.
2. Use the joystick (Up/Down button
) to select the Quality option.