Filter
Top Products
34
Here are the descriptions of every setup item:
Item
Description
Brightness /
Contrast /
Saturation /
Sharpness
Control the image parameters. Click ‘ - ' to decrease
value, or click ‘ + ‘ to increase value. You can also input
the value in the field directly.
Default
Set all above values to default value ‘128’.
Mirror
Check ‘Vertical’ or ‘Horizontal’ box to flip the image
vertically or horizontally, this will help to correct the
orientation of image when IP camera is hanged
bottom-up by camera holder.
You can click both ‘Vertical’ and ‘Horizontal’ box at the
same time.
Power Line
Frequency
Select the frequency of power line of the place you’re
using this IP camera. This will help to reduce the flicker
of certain lights in the image.
Condition
Select the condition that you’ll be using this IP camera
from dropdown menu.
- Auto: IP camera will adjust its parameters
automatically.
- Night: You’ll be using this IP camera in dark places
where lights are insufficient.
TV Out
Click “Enable” box to enable its “VIDEO OUT” function
for connections and video sending to TV monitors or
DVRs.
Lens
(under “TV Out”)
While connecting with an auto iris lens, and would like
to have clear images from “VIDEO OUT”, please click
“Auto iris” to enable this feature.
Day
IR-cut filter will only be switched on when there’s
sunlight. You can define the starting and ending time
when IR-cut filter should be switched on by select
‘Schedule’ and define starting and ending time by
dropdown menu.
When you finish with above settings, click ‘Apply’ button to save changes.