Filter
Top Products
69
Select the camera you wish to add from ‘Camera’
dropdown list, and check the box ‘Image Lost’ and / or
‘Motion Detected’ if you want to get a warning
message when image lost of motion is detected, then
select the direction of camera icon, this will help you to
remember the orientation of camera on the EMAP.
After you click ‘OK’ button, a camera icon will appear
on EMAP with its camera number indicated:
You can add more cameras to EMAP by repeating
procedures listed above.
Configuration
Enter EdiView configuration page. See next chapter for
detailed instructions.
Playback
Playback recorded video. A new video playback
window will appear. See chapter III for detailed
instructions.
Recording
Start / stop video recording.
When recording video, this button will appear as red.
Schedule
Enable schedule recording. You must define schedule
in advance before you can enable schedule recording.