Filter
Top Products
EPHD04+ HDcctv DVR
93
Register/Update: Click the button to submit and register the name to the Everfocus server.
The DDNS name you choose must be unique; that is, it must not already be in use. You should
see a message “Status Update successes!” on the screen, and then you can use this host name
for remote access to the DVR. For example, http://hostname.everfocusddns.com
Note: It is not necessary to append the HTTP port number to the DDNS name. The EverFocus
DDNS server not only keeps track of your DVR’s IP address, but also keeps track of the ports.
6.6.4 Alarm Server
You can send out the alarm notifications to EverFocus’s CMS software, including PowerCon
and PowerVideo Plus. Please also consult the CMS’s user manual for network alarm settings.
Figure 6-27
Server IP1~3: IP address of client PC. The network alarm can be transmitted to up to 3
addresses.
Protocol: Select the protocol type for alarm transmission. Note the protocol selected here
should match the protocol set up for the CMS alarm server.
UDP: User Datagram Protocol.
TCP: Transmission Control Protocol.
Port: Select the transmission port for network alarm messages. The port setup here should
match the port set up for the CMS alarm server.
Network ID: The network ID is an identifier for the alarm transmitter (DVR sending the alarm).