EverFocus EPHD04+ Security Camera User Manual


 
EPHD04+ HDcctv DVR
58
Record Quality: Select a recording quality for the Main Stream and Sub Stream. The options
include Low, Basic, Standard, High and Superior. The higher the quality, the more the HDD
space is used.
Normal Speed: Select a frame rate per second (FPS) for continuous recording. The speed is
limited by the maximum total recording capacity of the DVR as allocated across all the
installed cameras, with an upper limit of 30 FPS (NTSC) / 25 FPS (PAL) per individual camera
(real time recording).
Event Speed: Select a frame rate per second (FPS) for event recording.
Record Audio: Check the box to enable audio recording on the DVR. Note that the Audio
function is unavailable for Germany.
PTZ ID: To allow the DVR to recognize and then control the connected PTZ camera, you have
to set up an ID for the PTZ camera. Select On and then enter an ID for the camera. This ID
must match the ID address set up on the PTZ camera. For setting up the ID address on the PTZ
camera, please refer to the Users Manual of your PTZ camera.
Apply To: Click the button to apply the same settings to the desired cameras.