Filter
Top Products
EPN3600
31
3. Click “Set” button to save this selected position, or Click “Clear” button
to clear this position. “Go” button allow user to see a preset position on
screen.
4. User can set Title, Focus Mode and White Balance for each preset
position.
5. Click “Apply” button to confirm setting in step 4. User can also click
“Reset” button to reset three values set in step 4.
Freeze Picture: Speed dome will stop at the previous position until the next
position is reached.
ON:
freeze picture
OFF: disable freeze picture function.
2.4.2.2 AUTO MODE SETTINGS
2.4.2.2.1 Set Auto Tracking
User can click Program button right next to “Set Auto Tracking” to enter
“Auto Tracking” window (See
Figure 2-13) to configure auto tracking options for
a camera.