Filter
Top Products
EPN3600
81
are:
• IP setting
• DDNS setting
Default: The Default button should be used with caution. Pressing this
button will return all of the camera's settings, including the IP address, to the
factory default values. The camera will then have to be re-installed.
Save/Load Configuration Server
To take a backup of all of the configurations, press Save to save all
configurations to a config. file. If necessary, it is then possible to return to
the previous settings if the settings are changed and there is unexpected
behavior.
Press the Browse button to locate the saved config. file (see above) and
then click the Load button. The settings will be restored to the previous
configuration.
Upgrade Firmware
Upgrade the EPN2700/3100/3600 with the latest firmware.
Press Browse button to search firmware file. Press Upgrade button to
upgrade the firmware.
Note 1: Do not disconnect power to the unit during the upgrade. The unit reboots
automatically after the upgrade has completed. (1-5 minutes.)
2. During upgrading process, all event recording actions will be stopped. It
will continue to record after the camera is rebooted.