Filter
Top Products
5
First Steps
Readying the Remote Control
A battery is inserted in the remote control at shipment.
Before using the remote control, remove the plastic insu-
lating sheet from the battery chamber.
1 Note
The battery supplied with the remote control is intended for
trial use only. Replace the battery as described on page 6 if the
remote control does not function as expected.
Insulating sheet
Using the Remote
Point the remote at the infrared receiver on the digital viewer.
Infrared receiver
Approx. 3 m (9.8 ft.)
or less
Maximum vertical and
horizontal angle approx. 30 °
3 Caution
Do not place stickers or other obstructions over the infrared receiver.