Filter
Top Products
23
Copying Pictures via Infrared
Pictures can be copied to internal memory from compatible devices when the viewer is
in single-image display mode. The viewer will automatically receive pictures transferred
from the device; no other operation is required.
1
Place the viewer about 5 to 20 cm (2 to 8 in.) from the
other device with the infrared ports pointing directly
at each other. The ports should be at no more than a
15 ° angle.
2
Transmit pictures from the other device (see the manu-
al supplied with the device for details). The viewer will
display a message stating that it is receiving data via
infrared and pictures will be displayed in the viewer as
they are received.
3 Caution
If no pictures are received, make sure that there are no obstacles between the two devices and
that the infrared ports are correctly aligned and are not in direct sunlight or directly under a uo-
rescent light. Remote controls and other infrared devices and equipment that generates electri-
cal noise may interfere with transmission.
Saving Transferred Pictures
If DISP. & SAVE is selected for IR COMMUNICATION in the
setup menu (pg. 22), transferred pictures will automatically be
saved in internal memory after being displayed in the viewer.
DISP. & SAVE
DISP
IR COMMUNICATION
SELECT SET
Connections