Filter
Top Products
25
Connections
Connecting to a Computer
Copying Pictures to the Viewer
Copying Pictures to the Viewer
1
Turn the viewer o and connect the supplied USB cable as shown, making sure the
connectors are fully inserted (the orientation and location of the computer connector
may di er from that shown; consult the computer manual for details). Connect the
viewer directly to the computer; do not use a USB hub or keyboard.
Mini-B USB plug
USB cableComputer USB connector
3 Caution
Do
NOT connect the cable while the viewer is on.
2
Turn the viewer on and follow the on-screen instructions to copy pictures.
1 Notes
• The computer may require some time to register the viewer with the system the rst time it
is connected.
• Viewer controls can not be used while the viewer is connected to a computer.
3
When transfer is complete, follow the on-screen instructions to turn the viewer o
and disconnect the USB cable.
3 Caution
Do not disconnect the cable during transfer. Failure to observe this precaution could result
in loss of data.
Uninstalling FinePixViewer
Only uninstall FinePixViewer before reinstalling the software or when it is no longer required.
After quitting FinePixViewer and disconnecting the viewer, open the control panel and use “Pro-
grams and Features” (Windows Vista) or “Add or Remove Programs” (other versions of Windows)
to uninstall FinePixViewer, FinePix Resource, and FinePix Studio. One or more con rmation dia-
logs may be displayed; read the contents carefully before clicking OK.