FujiFilm FinePix F410 Digital Camera User Manual


 
59
3
58
!
The focus and exposure are determined for the first
frame and cannot be changed during shooting.
!
If there is insufficient available space on the xD
-
Picture Card to take the maximum number of
continuous shots, the number of shots that can be
recorded is taken.
!
¨” appears on the LCD monitor during
shooting.
!
You cannot use the flash in this mode.
!
The speed of continuous shooting remains the same
regardless of the image quality setting.
!
The shots should be taken using the viewfinder.
!
The results of the shot are displayed even when
“POSTVIEW” is set to OFF
(
P.83
)
.
!
The time required to record a file is approximately
12 seconds in “
1” mode
(
for TOP or FINAL 4
-
frame
continuous shooting
)
.
When Top 4
-
frame continuous shooting is set to
ON, the “t” appears on the LCD monitor. When
Final 4
-
frame continuous shooting is set to ON,
}” appears on the LCD monitor.
Continuous shooting continues while the shutter
button is pressed down fully.
This mode can be selected in the “
|”, “W” still
image modes.
Select the continuous shooting mode you want
to use.
See P.60 for more information on continuous
shooting modes.
21
Displaying the menus (P.42)
t
CONTINUOUS SHOOTING
PHOTOGRAPHY MENU
Displaying the menus
(
P.56
)
The self timer lamp lights for 5 seconds and then
starts flashing. 5 seconds later the camera
makes a clicking noise and takes the picture.
A counter on the LCD monitor counts down the
time until the shot is taken.
Self-timer mode is automatically cancelled after
each shot.
!
To stop the self-timer once it has started running,
press the “BACK” button.
43
=
SELF
-
TIMER PHOTOGRAPHY
PHOTOGRAPHY MENU