Filter
Top Products
95
5
94
8. After you restart your Macintosh, the
“FinePixViewer installation completed”
message appears. Click “Using
FinePixViewer” to view the basic
FinePixViewer functions.
9. To install Acrobat Reader, click “Install
Acrobat Reader”.
✽
✽ You should install Adobe Systems’ Acrobat
Reader software to read the FinePixViewer User’s
Guide
(
PDF
)
.
If you already have the latest version installed,
this step is not required.
10
. Proceed with the installation as directed
by the on-screen instructions.
INSTALLATION ON A Mac OS 8.6 TO 9.2
■ To install Acrobat Reader later...
1. Double-click the “FinePix” CD-ROM to
open the CD
-
ROM window.
2. Double-click “FinePixViewer for Mac OS
8.6
-
9.x” → “Acrobat Reader” → “English”
folder.
3. Double-click “English Reader Installer”.
4. Proceed with the installation as directed
by the on-screen instructions.
INSTALLATION ON A Mac OS X
To run this software, you must have the hardware and software described below. Check your system
before you begin the installation.
■ Hardware and software requirements
✽1 Models with a USB port as a standard feature
✽2 AVI movies cannot be played back on version 10.0.4.
✽3 Required to use the FinePix Internet Service. The software can still be installed even if you do not have an Internet
connection.
Pre-installation Checklist
Compatible Mac Power Macintosh G3
✽1
, PowerBook G3
✽1
, Power Macintosh G4, iMac, iBook,
Power Macintosh G4 Cube, or PowerBook G4
Operating System
Mac OS X (compatible with version 10.0.4, 10.2.3
✽2
)
RAM 192 MB minimum
, 256MB recommeded
Hard disk space
Amount required for installation : 70 MB minimum
Amount required for operation : 300 MB minimum
(
When
ImageMixer VCD for FinePix
is used : 2 GB or better
)
Display
800 × 600 pixels or better, at least 32,000 colors
Internet connection
✽3
i To use the FinePix Internet Service or mail attachment function
An Internet connection and e-mail transmission software
i Connection speed : 56k or better recommended
◆
NOTE
◆
i Connect the camera directly to the Macintosh using the special USB cable. The software may not operate correctly if you
use an extension cable or connect the camera via a USB hub.
i Push the USB connector fully into the socket to ensure that it is securely connected. The software may not operate
correctly if the connection is faulty.
i Additional USB interface board is not guaranteed.
i If other applications will be used at the same time, allocate the additional amount required for those applications also.