Filter
Top Products
61
Advanced
Features
60
2
The AF frame appears in the location to which the
target point was moved.
Take the picture in the normal way.
To reposition the AF frame, repeat step 1.
1
˜ AREA
The camera changes the focusing position on the
screen. Use this setting when composing the shot
using a tripod and changing the focusing position.
1 Hold down the “™£¢” button.
2 Press “a”, “b”, “d” or “c” to move the “:”
(target point) to the focusing position.
3 Release the “™£¢” button.
01 0203
After moving
Before moving
Regardless of the AF frame location, the exposure is always set using the area in the center of the
screen. To expose the shot for your main subject, use AE lock.
; CENTER
The camera focuses on the center of the screen.
Use this setting when taking pictures using AF/AE
lock (➡P.27).
3
When the correct exposure is measured,
“ç” appears.
Press the “MENU/OK” button to confirm the setting.
●
!
The specified custom white balance is retained until it is
reset. This setting is retained even if the batteries are
removed.
●
!
After taking the picture, check the “Color (White Balance)”
setting for the image.
i Set “IMAGE DISP.” to “PREVIEW” in the SET-UP screen
(➡P.83).
i Set the Power switch to “
w” (➡P.19).
STILL PHOTOGRAPHY MENU
STILL PHOTOGRAPHY MENU
When “√” or “∫” appears, the white
balance was not measured at the correct exposure.
Set the exposure compensation again, using a
negative value (–) when “√” appears and a
positive value (+) when “∫” appears.
+ AF MODE
˜ AREA
; CENTER
´ MULTI
or
´ MULTI
Pressing the Shutter button down halfway, the
camera recognizes any strongly contrasting subject
near the center of the screen and displays the AF
frame over subject in focus.
●
!
If the camera has difficulty in focusing on the main subject,
select the “
;” CENTER focusing mode and use AF/AE lock
(➡P.27).