Filter
Top Products
14 15
Getting Ready
1
TURNING ON AND OFF SETTING THE DATE AND TIME
SETSET NONO
DATE/TIME NOT SETDATE/TIME NOT SET
1
When using the camera for the first time after
purchasing, the date and time are cleared.
Press the “MENU/OK” button to set the date and
time.
●
!
The message also appears when the battery has been
removed and the camera has been left for a long period.
●
!
To set the date and time later, press the “DISP/BACK” button.
●
!
If you do not set the date and time, this message will appear
each time you turn the camera on.
DATE/TIMEDATE/TIME
SETSET
CANCELCANCEL
2008
2007
2005
2004
11 2100
AM
YY MM DD
2006
2
1Press “d” or “c” to select Year, Month, Day,
Hour or Minute.
2Press “a” or “b” to correct the setting.
01 02
●
!
Holding down “a” or “b” changes the numbers continuously.
●
!
When the time displayed passes “12”, the AM/PM setting
changes.
3
Once you have set the date and time, press the
“MENU/OK” button. Pressing the “MENU/OK”
button changes the camera to Photography or
Playback mode.
●
!
At the time of purchase and after leaving the camera for a
long period with the battery removed, settings such as the
date and time are cleared. Once the AC power adapter has
been connected or the battery has been installed for about 2
hours or more, the camera settings will be retained for
roughly 6 hours even if both sources of power are removed.
DATE/TIMEDATE/TIME
2006 2 24 1
0
58
59
01
02
A M
00
YY MM DD
SETSET
CANCELCANCEL
✽ Correcting the date and time (➡P.16)
Move to Photography mode or Playback mode
Press the “w” button during shooting to change to
Playback mode.
To return to Photography mode, press the shutter
button.
Photography a Playback
Press the “w” button for about 1 second to turn the
camera on in Playback mode.
To turn the camera off, press the “POWER” button.
Turn the camera on in Playback mode
Power-ON
●
!
Turn the Mode switch to return to Photography mode.
Press the “POWER” button to turn the camera on.
Press the “POWER” button again to turn the
camera off.
The lens moves when the camera is in
Photography mode. Take care not to obstruct the
lens. Obstructing the lens will cause damage.
When this occurs, [FOCUS ERROR] or [ZOOM
ERROR] appears. Take care also not to get
fingerprints on the camera lens as this will result in
impaired image quality in your shots.
Turn the camera on in Photography mode
◆
Auto power off function
◆
When the Auto power off function is active and the camera is left unused for 2 or 5 minutes, the
function turns the camera off (➡P.82). To turn the camera back on, press the “POWER” button. To play
back images, hold down the “
w” button for about 1 second.