Filter
Top Products
137
Appendices
[CANNOT BE
TRANSMITTED]
• An attempt was made to send a movie or an image
shot by the camera other than FinePix Z200fd (
is displayed).
• Transmission was disconnected during IR
communication.
• The image format is not transmittable.
• A movie can not be sent.
• Do not move the camera out of the transmission
distance. Do not place anything between the
transmitting and receiving devices.
[CANNOT BE
RECEIVED]
Transmission was disconnected during IR
communication.
Do not move the camera out of the transmission
distance. Do not place anything between the
transmitting and receiving devices.
[PRINTER ERROR]
Displayed for PictBridge. • Check that the printer is not out of paper or out of
ink.
• Turn the printer off briefly and then turn it back on.
• Refer to the user manual supplied with your
printer.
[PRINTER ERROR
RESUME?]
Displayed for PictBridge. Check that the printer is not out of paper or out of ink.
Printing automatically restarts when the error is
cleared. If the message still appears after checking,
press MENU/OK to restart printing.
[CANNOT BE PRINTED]
Displayed for PictBridge. • Refer to the user manual for the printer being used
and check whether the printer supports the JFIF-
JPEG or Exif-JPEG image format. If not, the printer
cannot print the images.
• Movie images cannot be printed.
• Was the image data photographed using FinePix
Z200fd?
You may not be able to print some images
photographed on other cameras.
Warning Displayed Explanation Remedy