FujiFilm Z200fd Digital Camera User Manual


 
150
Specifications
Battery NP-45
Nominal voltage DC 3.7V
Nominal capacity 740 mAh
Operating temperature0°C to +40°C (+32°F to +104°F)
Dimensions 31 mm × 39.4 mm × 5.7 mm(1.2 in. ×
1.6 in. × 0.2 in.)(W × H × D)
Mass (Weight) Approx. 15 g (1.0 oz.)
Battery Charger BC-45
Rated input 100-240 V AC, 50/60 Hz
Input capacity 9.0 VA
Rated output 4.2 V DC, 550 mA
Applicable batteries Rechargeable Battery NP-45
Charging time Approx. 180 minutes
Dimensions 91 mm × 46 mm × 21 mm(3.6 in. ×
1.8 in. × 0.8 in.) (L × W × D)
Mass (Weight) Approx. 55 g (1.9 oz.) (excluding
batteries)
Operating
temperatures
0°C to + 40°C(+ 32°F to + 104°F)
Notes on Using the Battery Charger
The battery and battery charger themselves will
become warm due to the power stored inside them. This
is normal and does not indicate a fault. Wherever
possible, use the battery charger in a well-ventilated
location.
There may be vibration noises from inside the battery
charger during use. This is normal and does not indicate
a fault.
Do not use the battery charger to charge batteries other
than rechargeable battery NP-45.
The battery charger could cause interference if placed
close to a radio during charging. In this event, move the
radio and charger further apart.
Do not leave the battery charger in the following types
of locations:
Extremely humidity or high temperatures, such as
close to a heating appliance or in direct sunlight
Places with strong vibration
In very dusty places
The battery charger accepts input voltages of 100-240
V AC at 50 or 60 Hz and can be used all over the world.
However, the shape of the plug and socket-outlet
depends on the country of use. Consult your travel
agent for details.
Do not use the connecting cable for the battery charger
with any other device.