Filter
Top Products
31
Using the Camera
Flash
Change the flash mode when you want to take pictures without
flash. See p.60 for information on flash.
CAUTION
• The image shown on the LCD monitor before the
picture is taken may differ in brightness, color, etc. from
the image actually recorded. Play back the recorded
image to check it (➝p.37).
• When selecting a slow shutter speed that will cause
camera shake, appears on the LCD monitor. Use
flash or a tripod.
• See p.133-137 for information on Warning displays.
See “Troubleshooting” (➝p.138-145) for more
information.
ZIndicator lamp display
The indicator lamp lights or blinks when pressing the shutter
button, etc. The indicator lamp shows the camera status.
MEMO
Detailed warning messages appear on the LCD monitor
(➝p.133-137).
When pressing the shutter
button down halfway, b
appears on the LCD monitor
before the flash fires.
Display Status
Lit green Locking the focus
Blinking green Camera shake warning, AF warning,
or AE warning (ready to shoot)
Blinking green and
orange alternately
Recording to Memory Card or internal
memory (ready to shoot)
Lit orange Recording to Memory Card or internal
memory (not ready)
Blinking orange Charging flash (flash will not fire)
Blinking red • Warnings for Memory Card and
internal memory
Card not formatted, incorrect format,
memory full, Memory Card or
internal memory error
• Lens operation error
Indicator lamp