Filter
Top Products
59
3
58
DIGITAL ZOOM
You can use the digital zoom function for all
Resolution (File Size) settings other than “2400
✕
1800”.
●
To use the digital zoom
Use the optical zoom to zoom in fully (telephoto)
and then press the “T” button again.
●
To revert to optical zoom
Use the digital zoom to zoom out fully (wide-
angle) and then press the “W” button again.
A “zoom bar” appears on the screen. If the
image on the screen is difficult to make out,
press the shutter button down halfway.
●
Digital zoom focal lengths
1600
✕
1200 :
Equivalent to approx.
210
mm
–315
mm
(1.5
✕
)
1280
✕
960 :
Equivalent to approx.
210
mm
–393
mm
(1.875
✕
)
640
✕
480 :
Equivalent to approx.
210
mm
–787
mm
(3.75
✕
)
Movie :
Equivalent to approx.
35
mm
– 66
mm
(1.875
✕
)
Zoom bar display
Movie1600
1200
1280
960
640
480
21
●
!
You cannot use the flash in this mode.
●
!
The continuous photography speed is the same
regardless of the quality and file size settings.
●
!
The focus and exposure are determined for the first
frame and cannot be changed during shooting.
Continuous shooting can be specified in all
photography modes except “.”.
Selecting continuous shooting allows you to
shoot up to 5 frames continuously at intervals as
short as 0.2 seconds.
When you press the “&” button, the “&” icon is
displayed and continuous shooting is selected.
Press the “&” button again to cancel continuous
shooting.
If Preview display is set to ON (➡P.100), the
preview screen appears when you take a picture.
The images are displayed in chronological order
from the left side of the screen. To record the
images, press the “MENU/OK” button. To continue
without recording the images, press the “BACK”
button.
●
!
You cannot use the digital zoom for resolutions of
2400
✕
1800.
●
!
The optical zoom is equivalent to approximately
35 mm – 210 mm on a 35 mm camera.
●
!
See P.99 for information on changing the file size
setting.
●
!
When you switch to digital zoom, the video image on
the LCD monitor no longer changes smoothly.
& CONTINUOUS SHOOTING
Auto Bracketing (➡P.68) is disabled when
Continuous Shooting is selected.