Filter
Top Products
Camera TV Software Data
45
Settings
This screen allows you to set parameters that cannot be set using the “2” mode on the
camera (/P.32), including the slide show display mode and the power save function settings.
Power off
Return to “Main
menu” (P.36)
Select
Execute/
Confirm
Select
Move to top of menu
Move to bottom of menu
!Select the setting.
@Apply the setting.
#Change the setting.
$Confirm the setting.
h Always select “Save” after you have
changed the settings.
Parameter Settings
Slide show
mode
once, repeat
Description
Selects whether the slide
show is run just once and then
ends or is run repeatedly.
Slide show
duration
(seconds)
3, 5, 10, 15
Sets the time for which each
image frame is displayed.
Time out
(seconds)
30, 45, 60,
90, none
Sets the interval after which
the power save function
operates.
Beep tone on, off
Selects whether or not the
beep tone sounds.
Picture
counter
count down,
count up
Selects whether the counter
display counts down or
counts up.
Restore default
settings
–
Returns all the parameters
to factory default settings.
Save – Saves the settings.
P
Point