Filter
Top Products
62
Using iX-100 Twain Driver for Windows only
Before connecting the camera to your PC using the USB cable, check that “iX-100 Twain Driver” was installed correctly.
1
Switch the camera on, and then
connect it to your PC using the
USB cable.
Installing this software allows you to open images directly from TWAIN-compatible
software applications such as PhotoImpression.
h Take care to connect the plugs on the
USB cable into the correct sockets, and
endure that the plugs are inserted firmly.
h The Power Save function does not
operate when a USB connection is
being used.
P
2
Launch a TWAIN-compatible
software application, select the
device and download your
images.
✽ Choose “iX-100 Twain Driver” to select
the TWAIN driver software.
✽ The method for selecting the TWAIN
driver differs depending on the software
you are using. If you are using
PhotoImpression, refer to P.66.
When the TWAIN driver is selected, the
screen shown at right appears.
Do not disconnect the camera or switch
the camera off when the camera and PC
are communicating.
P
Windows Macintosh
Point
Point