Filter
Top Products
21
Using the Camera
2
1
1Set the Power switch to “q”.
2Set the Mode dial to “B”.
h Focal range
Wide-angle: approx. 90 cm (3.0 ft.) to infinity
Telephoto: approx. 2 m (6.6 ft.) to infinity
●
!
Use Macro mode for subjects closer than 90 cm (3.0 ft.)
(➡P.46).
●
!
When [CARD ERROR], [CARD NOT INITIALIZED], [CARD
FULL] or [NO CARD] appears, see P.123.
01 02
3
Lock the Focus mode selector lock switch to
prevent the switch from moving.
1Unlock the Focus mode selector lock switch.
2Press the Focus mode selector button to set the
Focus mode to “S-AF”.
●
!
See P.44-45 for information on the manual focus “MF” and
the continuous AF “C-AF”.
2
01 02
12
N
S-AFS-AF
2000
F
2 8
S-AF
S-AF
MF
MF
C-AF
C-AF
4
Press the “EVF/LCD” button to alternate the display
between the viewfinder (EVF) and the LCD
monitor. Press the “EVF/LCD” button to select the
viewfinder (EVF).
When the AF frame in the viewfinder (EVF) is
difficult to see, adjust the viewfinder using the
Diopter adjustment dial.
EVF
LCD
Diopter adjustment dial
The EVF/LCD selection is retained even when the
camera is off or the mode setting is changed.
TAKING PICTURES
(
AUTO MODE
)
PHOTOGRAPHY MODE
Continued
20
BASIC OPERATION GUIDE
SELF-TIMER
SELF-TIMER
SET
SET
1
2
AUTO
AUTO
OFF
OFF
OFF
OFF
OFF
OFF
:
:
:
:
:
:
1
2
AUTO
AUTO
OFF
OFF
OFF
OFF
:
:
:
:
:
:
OFF
OFF
SET
SET
OFF
OFF
1
2
AUTO
AUTO
OFF
OFF
OFF
OFF
:
:
:
:
:
:
10 SEC
10 SEC
SET
SET
OFF
OFF
Up, down, left and right are indicated by black triangles in the Owner’s Manual. Up or down is shown
as “a” or “b”, and left or right is shown as “d” or “c”.
Instructions for the next step in the procedure
appear at the bottom of the screen. Press the
button indicated.
In the right side screen, press the “MENU/OK”
button to erase the displayed frame. To cancel
erasing, press the “DISP/BACK” button.
◆ Displaying the on-screen Help ◆
DISP/BACK button
DISP: Press this button to
select the screen display.
BACK: Press this button to
stop a procedure midway
through.
Using the Menus
1Displaying the menu.
Press the “MENU/OK” button.
5Confirming the setting.
Press the “MENU/OK” button.
2Selecting a menu option.
Press the up or down arrow
on the 4-direction button.
3Selecting an option.
Press the right arrow on the
4-direction button.
4Selecting a setting.
Press the up or down arrow on
the 4-direction button.
Photo mode button
Photography: Select the
quality mode, sensitivity and
FinePix COLOR settings.
Playback: Specify the print
order (DPOF) settings.
dc button
Photography: d button
Tur ns Macro ( ) on and off.
c button
Sets the flash ( ).
Playback: Change frame or movie frame advance.
ERASE OK?
ERASE OK?
YES
YES
CANCEL
CANCEL
YES
YES
CANCEL
CANCEL