Filter
Top Products
93
Settings
4
ã
PLAYBACK VOLUME
Adjust volume while playing back movie and voice
memo.
1Press “d” or “c” to adjust the volume. The
larger the number, the larger the volume is
emitted. “0” indicates a sound deadening.
2Press the “MENU/OK” button to confirm the new
setting.
110 2 3 4
5
6
7
8 9 101 0
SETSET CANCELCANCEL
01 02
OFFOFF
1.5 SEC1.5 SEC
SETSET
IMAGE DISP.IMAGE DISP.
1
4
3
2
RENEWRENEW
SETSET
3
SEC SEC
CONTCONT
1.5
SECSEC
:
:
:
:
:
:
Use this setting to specify whether images are
displayed after shooting.
CONT: The results are always displayed after you
shoot. Press the “MENU/OK” button to
record the images and take another picture.
3 SEC/1.5 SEC: The image appears for about 3 or
1.5 seconds and is then recorded.
OFF: Images are recorded without being displayed.
●
!
In Long-period continuous shooting, the images do not
appear.
●
!
In top 3-frame continuous shooting, auto bracketing and final
3-frame continuous shooting, the images appear for a set
time before being recorded even when “OFF” is selected.
●
!
The color tones in images displayed when “3 SEC” or “1.5
SEC” is selected may differ slightly from those in the images
actually recorded.
á
IMAGE DISPLAY
109
105
òUSB
MODE
¶/®
¶
¶: DSC (Mass storage device) mode
Provides a simple way to read images from an xD-Picture
Card and store images onto an xD-Picture Card.
®: PictBridge
If a printer that supports PictBridge is available, images can
be printed by connecting the camera directly to the
PictBridge-compatible printer without using a PC.
–
õ
VIDEO
SYSTEM
NTSC/PAL – Specifies whether video output is set to NTSC or PAL.
92
SET-UP
■ SET-UP menu options
Settings Display
Factory default
Explanation
Page
–
àBEEP
VOLUME
OFF/1/2/3 2
Sets the volume of the tone emitted when the camera
controls are used.
áIMAGE
DISP.
CONT/3 SEC/
1.5 SEC/OFF
1.5 SEC
Specifies whether an image checking screen (photography
result) appears after taking a picture.
The image appears for a few moments and is then recorded.
The color tones in images recorded may differ from actual
color. Play back the recorded images to check them.
93
94
éFRAME
NO.
CONT./RENEW CONT.
Specifies whether frame numbers are assigned
consecutively from previous numbers or begin again.
96
ïFORMAT
OK – Erases all files.
15
ì
DATE/TIME
SET – Corrects the date and time.
97
ó
TIME
DIFFERENCE
SET – Specifies the time difference settings.
ô
17
ENGLISH Specifies the language used for screen display.
–
úRESET
OK –
Resets all the camera settings (other than the DATE/TIME,
TIME DIFFERENCE, , VIDEO SYSTEM and
BACKGROUND COLOR) to the factory default values set at
shipment. A confirmation message appears when you press
“c”. To reset the camera settings, press the “MENU/OK”
button again.
–
äSHUTTER
VOLUME
OFF/1/2/3 2
Sets the volume of the sound emitted when the shutter operates.
93
ã
PLAYBACK
VOLUME
SET 7 Sets the volume of playing back movie and voice memo.
94
ê
LCD
BRIGHTNESS
SET 0 Sets the screen brightness.
95
ëDIGITAL
ZOOM
ON/OFF OFF Specifies whether digital zoom is used together.
–
ö
BACKGROUND
COLOR
SET – Specifies the colors of menu and cursor.
96
î
AUTO
POWER OFF
5 MIN/2 MIN/OFF 2 MIN
Sets the time of turning camera off when camera is not
used.
1
2
3
4
✽ How to use the SET-UP menu (➡P.90)
●
!
Always turn the camera off when replacing the batteries. Opening the battery cover or disconnecting the AC power adapter
without turning the camera off may cause the camera settings to revert to the factory default values set at shipment.
–
è
AF
ILLUMINATOR
ON/OFF ON Specifies whether the AF-assist illuminator is ON or OFF.
–
QZOOM
POSITION
RESET/RESUME RESET
Specifies whether the position of the lens is recorded when
the camera is turned off. The lens moves to the recorded
position when turning the camera on again.
95
≤
CCD-RAW
ON/OFF OFF
Sets the image quality to CCD-RAW. Because no image
processing is performed on the camera for CCD-RAW
images, images must be processed on a PC.
120
W
DISCHARGE
OK – Discharges Ni-MH batteries.