Filter
Top Products
40 41
Advanced Features
3
250 F3.2
Shutter speed
121212
NNN
ISOISO
200
M SHUTTER-PRIORITY AUTO
PHOTOGRAPHY FUNCTIONS
Set the Mode dial to “M”.
This is an automatic mode to set the shutter speed.
Use this mode to freeze a moving subject (fast
shutter speed) or convey the impression of
movement (slow shutter speed).
Setting the shutter speed
Press “a” or “b” to select the shutter speed.
hShutter speed setting
3 sec. to 1/1000 sec. in 1/3 EV increments
◆
The shutter speed and aperture setting display
◆
In scenes that are extremely overexposed, the
aperture setting (F8) appears in red. When this
occurs, select a faster shutter speed (up to 1/1000
sec.).
Overexposed
In scenes that are extremely underexposed, the
aperture setting (F3.2) appears in red. When this
occurs, select a slower shutter speed (down to 3
sec.).
Underexposed
When the brightness of the subject is outside the
camera’s brightness metering range, “F---” appears
as the aperture setting. When this occurs, press the
shutter button down halfway to measure the light
level again and display a value.
Metering failed
12
250
FF
8
N
250
F
8
ISOISO
200
1000
FF
3.2
1000
F
3.2
121212
NNN
ISOISO
200
250
FF
---
250
F
---
121212
NNN
ISOISO
200
250
F
3.2
Aperture
121212
NNN
ISOISO
200
< APERTURE-PRIORITY AUTO
PHOTOGRAPHY FUNCTIONS
Set the Mode dial to “<”.
This is an automatic mode to set the aperture.
Use this mode to have the area in front of and
behind the subject out of focus (large aperture) or
have both near and far subjects in focus (small
aperture).
Setting the aperture
Press “a” or “b” to select the aperture.
hAperture settings
F3.2 to F8 in 1/3 EV increments
◆
The shutter speed and aperture setting display
◆
In scenes that are extremely overexposed, the
shutter speed setting (1/1000 sec.) appears in red.
When this occurs, select a larger number of aperture
(up to F8).
Overexposed
In scenes that are extremely underexposed, the
shutter speed setting appears in red. When this
occurs, select a smaller number of aperture.
Underexposed
When the brightness of the subject is outside the
camera’s brightness metering range, “----” appears
as the shutter speed setting. When this occurs, press
the shutter button down halfway to measure the light
level again and display a value.
Metering failed
12
1000
F
3.2
N
1000
F
3.2
ISOISO
200
12
4"
F
8
N
4"
F
8
ISOISO
200
12
----
F
3.2
N
----
F
3.2
ISOISO
200