Fujitsu fi-5220C Photo Scanner User Manual


 
fi-5120C / fi-5220C Image Scanner Operator
Guide
TROUBLE SHOOTING
CONTENTS MAP
TOP
7.2 Document Quality (2)
1
2
ATTENTION
This scanner can scan ID cards through the Automatic Document Feeder with the following precautions.
Place one card at a time into the Auto Document Feeder.
ID card feeding requires the card to be fed through the Auto Document Feeder in portrait mode as in
the following figure.
Smooth cards should be placed face down in the Auto Document Feeder.
Embossed cards (raised lettering) should be placed with the embossed side down.
The card to be scanned should be within the ISO7810 compliance, type ID-1.
ISO7810-compliant, Type ID-1 card
Material: PVC (Poly vinyl chloride) or PVCA (Polyvinyl chloride acetate)
Dimensions: 3.4 inch (height) x 2.1 inch (width) / 86 mm x 54 mm
Thickness:
0.03 ± 0.003inch / 0.76 ± 0.08mm
Cards that are excessively rigid or less flexible may not feed smoothly and excessive noise may
occur.
Cards should be clean from oil and without labels.
Cards cannot be scanned when the imprinter is installed.
1
2
All Rights Reserved Copyright 2006-2009 © PFU LIMITED