Gateway DC-M50 Digital Camera User Manual


 
164
Problem
The zoom play
cannot be per-
formed.
The image is too
dark or bright.
Even when the
lens comes out,
the data panel is
turned off and
the camera can
not function.
The recorded
image file is
damaged.
The camera
does not function
correctly due to
the strong static
electricity, etc.
Check
Did you take a picture with the
digital zoom function?
Is the exposure compensation
value specified?
Has the battery-condition
indicator blinked (all the indicators
disappeared after 5 seconds ) ?
Did you remove the CF card when
the image data was recorded on or
read from the CF card?
Solution
The picture captured with the digital zoom
function cannot be played back in the zoom
play mode.
Specify 0 for the exposure compensation
value.
If the battery-condition indicator blinks, all
the indicators will disappear after 5 seconds
while the lens is protruding.
Replace the batteries.
The data is being recorded on or read from the
CF card while the focus lamp ( green ) blinks
slowly (about 2 times in a second ). Do not
remove the CF card from the camera.
Page
50
85
99
25
33
-
Remove the batteries and insert them again.
After that, turn on the camera.
* If the camera cannot be turned on correctly, the CF card may be damaged. In
this case, transfer the image data on the CF card to the computer and then format
the CF card.