Filter
Top Products
32
INSERTING/REMOVING THE COMPACT FLASH(CF) CARD
Be sure to turn off the camera when inserting or removing the CF card into or from the camera.
Otherwise, the data in the card may be lost or the card may be damaged.
If you insert or remove the CF card when the camera is turned on, re-format the CF card after
transferring the data from the card to your computer if the data is safe.
INSERTING THE CF CARD
1
Open the card-slot door as shown in the figure.
2
Insert the CF card into the card slot.
• Position the flat edge side of the card towards the camera lens and insert the
card with the signal part facing down until the card stops.
• Insert the card straight. Do not insert it on the angle.
• If the card is stopped halfway, check the direction of the card. Forcing the
card into the slot may damage the card or the camera.